Types Of Connectors

In this article we will learn about the types of connectors. We will know about how many types of connector which are used to connect two connector.

Types of Connectors

Types of connectors, connectors types,working of connectors , how many types of connector

Introduction of Connectors

For knowing types of connector we need to know introduction of connector.
A connector is an electromechanically device used for joining electrical circuits as an interface using a mechanical assembly.
There are  various types of connectors are following.

1. Male/Female type DB Connectors

A D-sub contains two or more parallel rows of pins or sockets usually surrounded by D-shaped metal shield that provides mechanical support, ensures correct orientation, and may screen against electromagnetic interference.

A. Male Connector

The part containing pin contacts is called the male connector or plug.

B. Female Connector

The part containing socket contacts is called the female connector or socket.

1. The sockets shield fits tightly inside the plugs shield.

2. panel mounted connectors usually have threaded nuts that accept screws on the cable and connector cover  that are used for locking  the connectors together and offering mechanical strain relief.

3. Occasionally the nuts may be found on a cable end connector if it is expected to connect to another cable end.

4. When screen cable are used, cable are used, the shield are connected to the overall screens of the cables. This creates an electrically continuous screen covering the whole cable and connector system.

2. Servo 0.1” Connector

In the electronics industry, connectors are most commonly referred to by the spacing between contacts. The most popular size, without a doubt, is the 0.1” connector. It is main types of connectors
Open up any computer and you will find tons of 0.1” connectors from IDE cables to USB and fire wire headers. That’s exactly the type of connector used by the RC industry for servo and anything else that plugs into you receiver. 0.1” connector applies to servo connectors and vice-versa.

3. RCA Connector

A RCA connector, sometimes called a phono connector or cinch connector, is a type of electrical connector commonly used to carry audio and video signals. The RCA connectors are also sometimes casually referred to as A/V (audio/ video) jacks. The name of RCA derives frame the Radio Corporation of America.

4. BNC connector

Types of connectors, connectors types,working of connectors , how many types of connector

The BNC (Bayonet Ne ill-councilman) connector is miniature quick connect/disconnect radio frequency connector used for coaxial cable. If features two bayonet lugs on the female connector, mating is fully achieved with a quarter turn of the coupling nut.it is also main types of connectors.

5. HDMI Connector (high definition multimedia interface)

HDMI is a compact audio/video interface for transferring uncompressed video data and compressed or uncompressed digital audio data from a HDMI compliant source device. Such as a display controller, to a compatible computer monitor, video projector, digital television or digital audio device.
There are some more types of connector which is given below.

6. Audio \ Video connector

Audio connector and video connectors are electrical connector (or optical connector) for carrying audio signal and video signal of either analog or digital format.

7. DIN Connector

A DIN connector is connector that was originally standardized by the detaches institute for norming (DIN).

8. XLR Connector

XLR connector plugs and sockets are used mostly in professional audio and video electronics cabling applications. XLR connectors are also known as cannon plugs. They are used for analog or digital balanced audio with a balanced line.

9. Mini-DIN connector

The mini- DIN connector is a family of multi-pin electrical connectors used in a variedty of applications. Mini DOM is similar to larger odder DIN connector.

10. RF Connector

A coaxial RF connector (radio frequency connector) is an electrical connector designed to work at radio frequencies in the multi megahertz range.

11. USB Connector

A universal serial bus (USB) connector is a connector between a computer and a peripheral device such as a printer, monitor, scanner mouse or keyboard. It is a part of the USB interface, which includes types of parts, cables and connectors.
Hence it is the types of connector if you will find any incorrect above please comment below in comment box.
Types of connectors, connectors types,working of connectors , how many types of connector

For knowing more about the types of connectors you must watch this video.

Post a Comment